Health O Meter PRO PLUS 1100KL Operation Manual page 11

OPERATION INSTRUCTIONS
MANUAL TARE
1. Make sure there is no object on the weighing platform.
2. Press the ON/OFF button to turn the scale on.
3. Wait until "000LB00oz" and "ZERO" on the left side of the display appear.
4. Press the TARE button (9). The user will be prompted to enter the TARE value.
5. Use the keypad to enter the weight of the object desired to be tared (i.e. wheelchair) and press
ENTER.
6. The value entered will be displayed as a negative value.
7. Place the patient and the tared object on the scale. The scale will automatically deduct the
entered tared weight from the gross weight of the patient and tared object.
8. The weight of the patient will appear on the scale.
9. The tared value is stored in memory until changed or cleared.
10. To remove the Tare, press the TARE button (9) again. The word "TARE" will disappear from
the display and the tare value will be deleted from memory. The scale will resume normal
operation.
FOR ADDITIONAL INSTRUCTIONS ON AUTOMATICALLY OR MANUALLY ENTERING THE TARE
1. Complete steps 1 to 4 above for"Weighing a Patient".
2. Press the BMI button (2).
3. The scale will prompt you to enter the patient's height. Use the keypad to enter the height.
Note: When weighing in lbs., height is entered in ¼" increments. For the fractional portion of the
height, press 1 for ¼", press 2 for ½" and 3 for ¾". When weighing in kg the height is
entered in 1cm increments.
4. Press ENTER.
5. Display will show the patient's BMI.
6. Press ENTER to return to normal weighing operation.
Note: The scale will not calculate a BMI for a patient 24 pounds (12 kg) or less. If a height is not
entered within 30 seconds of pressing the BMI key, the scale will return to normal
operation
5. Display will show the patient's BMI.
Note:
operation
2650KL & 2700KL
VALUE PLEASE REFER TO PAGE 13.
CALCULATING BMI
Figure . Keypad
10
Capacity: 700 lb x .2 lb - 310 kg x 100 g
1100KL