Table of Contents
Advertisement
32
Setting the backlight
Double-tap the "Control Panel" icon on the "Device
settings" menu, and double-tap the "Backlight" icon
calls up the "Backlight" settings screen.
- Backlight function
"Enable" or "Disable" the backlight function. If it is
"Enable", the backlight comes on when you press
any key or tap the touch screen.
- Backlight on-duration
Set the on-duration of the backlight that comes on
when you press any key or tap the touch screen.
Battery Power: On-duration when the BHT is not
placed on the CU.
External Power: On-duration when the BHT is
placed on the CU.
- Brightness Level
Select the desired brightness level from the
following four choices:
(Dark)
Power Save
↑
Low Bright
｜
Mid Bright
｜
High Bright
↓
(Bright)
- Power Save Mode
Change the settings for turning off the backlight
after the BHT has not been used for a specified
period time:
Off:
The backlight turns off immediately.
Dim: The backlight remains on very dimly.
(
1)
*
Pressing the backlight function on/off key (the initial
setting: the simultaneous depression of the SF/ALP
(SF) key and right-hand trigger switch (M4 key))
toggles between enabled and disabled
regardless of the backlight function setting made on
this screen.
(
1)
*
states,
Advertisement
Table of Contents
