Table of Contents
Advertisement
4
Handling the BHT
• The BHT uses a laser light for indicating the scanning range. The
intensity of the laser light might be too low to inflict bodily injury.
However, do not look into the laser beam.
1040.10, 1040.11 except for deviations pursuant to laser notice No.
50, dated July 26, 2001.
information is provided to the user:
procedures other than those specified herein may result in
hazardous laser light exposure.
• Do not look into the light source through the reading window or point
the light source towards the eyes.
• Do not poke at the eyes with the stylus that comes with the BHT.
The BHT complies with IEC 60825-1:1993+A2:2001 and 21 CFR
In accordance with Clause 8 and 9, IEC 60825-1, the following
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Caution - Use of controls or adjustments or performance of
The light emitted through the reading window is harmful to the eyes.
Advertisement
Table of Contents
