Download Print this page

Ricoh 3800C Installation Manual page 2

Paper feed unit, 500 x 1, for machine code: g060/g080/g082
Hide thumbs Also See for 3800C:

Advertisement

Take out the packaged items, making sure there are two
thumb screws and one mounting bracket. Close the tray of
the 500-sheet paper feed unit firmly.
Slowly pull out Tray 2 while lifting up a little.
Fasten one thumb screw. A coin can be used to fasten the
screws.
Slowly slide Tray 2 back into the printer, until it stops.
Open the right cover of the 500-sheet paper feed unit.
ZDJP005J
ZHXH852J
ZDJP009J
ZHXH030N
Printed in Japan
Hook the mounting bracket to the hole, as shown.
Fasten the bracket with the other thumb screw. A coin can
be used to fasten the screws.
Close the right cover of the 500-sheet paper feed unit.
Stick label "3" above the handle on the front of the 500-
sheet paper feed unit.
Note
After finishing the installation, you can check the 500-sheet
paper feed unit is installed properly: Print the configuration
page from the "List/Test Print" menu. If it is installed properly,
you will see "Paper Feed Unit (Tray 3)" appear under the
"Options" list. (G060, G080)
After finishing all installation for printing, you can check whether
the 500-sheet Paper Feed Unit is installed properly. Print the
Configuration Page from the "Print Menu" menu. If it is installed
properly, you will see "Tray 3" under the "Paper Tray
Information" list. (G082)
If the paper feed unit is not installed properly, repeat the
procedure from step
. If you cannot install it properly even
after reinstallation, contact your sales or service representative.
Copyright © 2001, 2002
ZHXH040N
ZDJP012J
ZDJP126J
G567-8600B

Advertisement

loading