Land Pride PD15 Operator's Manual page 10

Important Safety Information
Important Safety Information
Safety Labels
Your Post Hole Digger comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
14577
14578
14740 30211
6
PD10, PD15, PD25 & PD35 Post Hole Diggers 317-048M
Table of Contents
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
818-522C
Danger: Moving Parts Label
818-522C
Danger: Moving Parts Label
818-540C
Danger: Guard Missing
8/9/19