Advertisement
Quick Links
Snow Trip Blade
STB1560, STB1572, STB1584 & STB1596
39685
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
301-493M
Operator's Manual
Printed 11/27/18
Advertisement
Related Manuals for Land Pride STB1560
Summary of Contents for Land Pride STB1560
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/27/18...
- Page 2 Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 5 Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
- Page 6 Lower attachment to the ground and Replace parts on this attachment implement. follow all shutdown procedures with genuine Land Pride parts only. Attach the chain to the tractor before leaving the operator’s seat to Do not alter this attachment in a way drawbar support or other specified perform maintenance.
- Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
- Page 8 838-293C 39686 Warning: Read Manual 858-692C 39686 Notice: Not Intended for Skid Steer or Track Loader 858-817C 39686 Warning: Thrown Object Hazard STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 9 Table of Contents Important Safety Information 838-614C 2" x 9" Red Reflector (2 places) 39686 838-615C 2" x 9" Amber Reflector (1 place) 39685 838-112C 39686 Danger: Pinching Hazard (2 places) 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 10 Table of Contents Important Safety Information 818-045C Warning: Pinch Point & Crush Hazard 39687 848-747C Warning: High Pressure Fluids 39687 838-102C Warning: Falling Hazard 39687 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 11 Your Land The STB15 Series front-mounted Snow Trip Blades are Pride dealer has trained personnel, repair parts, and designed and built by Land Pride to meet the needs of equipment needed to service the attachment. landscapers, construction companies, farmers,...
- Page 12 4. Raise the Snow Trip Blade with a hoist and install correctly located and visible when machine is Page 5 remaining carriage bolts (#2) and hex flange locknuts in transport position. (#3). STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 13 Orange Marker Assembly Trip Blade to level ground. Refer to Figure 1-3: Land Pride offers 28" tall orange markers that can be bolted to each side of the moldboard. They are ideal for 39708 locating the outer ends of the blade when approaching buildings, trees, poles, and other obstacles that could be damaged and/or damage the Snow Trip Blade when hit.
- Page 14 Table of Contents Section 1: Assembly & Set-up Angling Options Assembly Land Pride offers three angling options for the Snow Trip Blade. The Snow Trip Blade must be equipped with one of the following three angling options. NOTE: The STB1596 is only offered with dual cylinders and cushion valve option.
- Page 15 8. Thread hoses (#6A) and (#6B) as shown through hoses and fittings. hose retainer (#15). 9. Attach base end of hydraulic cylinder (#3A) to hitch assembly lug (#5A) with clevis pin (#2A) and hairpin (#1A). 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 16 21. Adjust hydraulic hoses and fittings as needed then 8. Attach hydraulic fittings (#13) and (#14) to hydraulic tighten all hoses and fittings. fittings (#12) and (#16) and hand tighten. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 17 Slowly retract and extend the cylinders to purge connecting them together. any trapped air from the system. c. Tighten fittings when trapped air is removed. 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 18 (#2). 6. Reattach the linchpin (#4) to the skid shoe (#1). 4. Tighten to correct torque. 39700 39701 Locking/Unlocking Blade Skid Shoe Adjustment Figure 2-2 Figure 2-1 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 19 Adding extra flat washers (#2) to the existing flat washer (#3) may be necessary to stretch the springs tight. 39674 Spring Adjustment Figure 2-4 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 20 5. Check all controls and operating functions of the allow your body or extremities to become too cold. If tractor. you are getting cold, go inside to warm-up before continuing. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 21 4. Loosen and remove 3/4"-10 x 2" bolt (#3), locknut (#1) and flat washers (#2) from hole (B). 5. Fasten bolt (#3), locknut (#1) and washers (#2) to storage hole (C). 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 22 • Accelerate slowly when starting a pass to allow time for tire traction and for snow to accumulate in front of the blade. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 23 Snow Trip Blade. 39744 d. Identify tight areas that will be hard to turn around in and make a plan for clearing such areas. Snow Trip Blade Hitch Plate Figure 3-1 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 24 The STB15 Series Snow Trip Blades Procedure” on page 8 were designed and built by Land Pride for 30 to 70 hp 3. Orient blade level and lock the float feature to prevent tractors with a loader using the universal quick-attach sudden shifting of unit while working on or around it.
- Page 25 Refer to Figure 4-3: 301-481A STB1584 Steel Cut Edge Package 301-489A STB1584 Poly Cut Edge Package Land Pride offers two hose options for hooking up to your 301-482A STB1596 Steel Cut Edge Package tractor. The 24 hose option (#1) is for connecting the...
- Page 26 301-463A (dual cylinders with cushion valve). Part Number & Description Angling Options 301-535A Bent Pin Option 301-463A Dual Cylinder with Cushion Valve Option 301-531A Dual Cylinder Option 39704 Angling Options Figure 4-4 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 27 Assembly” on page 24 if your cutting edge is made 10. Return to the tractor. Raise unit up and remove of poly wear material. support blocks. 39708 Steel Cutting Edge Removal and Assembly Figure 5-1 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 28 10. Return to the tractor. Raise unit up and remove 5. Inspect carriage bolts (#2) and nuts (#3) for wear. support blocks. Replace as needed. 39709 Poly Cutting Edge Removal and Assembly Figure 5-2 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 29 Store blade on a level surface in a clean, dry place. Inside storage will reduce maintenance and make for a longer blade life. 8. Follow all unhooking instructions on page 20 when disconnecting tractor from blade. 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 30 Quantity = 6 or more pumps (make sure grease is visible) 39710 Hours Pivot Pins 2 - Zerks Type of Lubrication: Multi-purpose grease Quantity = 6 or more pumps (make sure grease is visible) 39710 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 31 1200 lbs Base Unit Weight With Steel Cutting Edge 583 lbs 616 lbs 648 lbs 681 lbs With Poly Cutting Edge 594 lbs 629 lbs 664 lbs 698 lbs 39711 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 32 Helps protect the moldboard and cylinders in the event an obstruction is hit, by allowing Cushion valve hydraulic fluid to bypass the cushion valve and flow back to the tractor. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 33 Power equipment arms are not set in float Low areas do not clean-up well Set power equipment arms to float mode. mode. 11/27/18 STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M...
- Page 34 = nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. STB1560, STB1572, STB1584 & STB1596 Snow Trip Blade 301-493M 11/27/18...
- Page 35 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
- Page 36 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA...