Land Pride PD10 Series Specifications & Capacities

Post Hole Diggers
PTO Drive
Specifications & Capacities
Post Hole Diggers PTO Drive
Tractor HP Range
Weight Without Auger
Auger Length
Auger Flight Thickness
Auger Pipe
Auger Teeth
Number of Teeth
Pilot
Driveline
Maximum Operating PTO Speed
Gearbox
Gearbox Oil Capacity & Type
Output Shaft
3-Point Hitch Cat.
Boom Tube
Yoke Tube
Auger Sizes (Options)
Auger Extensions (Accessories)
Cat. III Torque Limiter Driveline
Hydraulic Down Pressure Kit
Storage Stand
PD10 = 31 1/2"
PD15 = 32"
Designs, specifications, features and information are subject to change without notice.
63
PD10 and PD15 Series Post Hole Diggers
PD10
15 to 30 HP
120 lbs.
30"
540 RPM 3:1 Ratio
3.4 Pints of SAE80-90W EP oil
Options and Accessories
6", 9", or 12"
Not Available
Available
Available
1/4"
2 1/2" ID
Forged, Individually Replaceable
40 Degree angle installed on flat side
50 Degree angle installed on angled side
6" - 2 teeth
9" & 12" - 4 teeth
Cast steel, 3 drill points
Cat. II Shearbolt
300 RPM
4.6 Pints of SAE80-90W EP oil
2" O.D. Round
Cat. I
2 7/8" O.D.
2 7/8" O.D.
7" & 14" Extensions Available
PD10 = 58 5/8"
PD15 = 77 5/8"
PD10 = 70"
PD15 = 89 1/2"
317-048S continued on next page
PD15
20 to 40 HP
161 lbs.
48"
540 RPM 3.18:1 Ratio
6", 9", or 12"
Not Available
Available
Available
6/23/11
26776