Table of Contents
Advertisement
Quick Links
Grapples
SGC0548
35825
Table of Contents
Read the Operator's Manual entirely. When you
!
see this symbol, the subsequent instructions and
warnings are serious - follow without exception.
Your life and the lives of others depend on it!
Cover photo may show optional equipment
not supplied with standard unit.
© Copyright 2016
380-138M
Operator's Manual
Printed
9/15/16
Advertisement
Table of Contents
Related Manuals for Land Pride SGC0548
Summary of Contents for Land Pride SGC0548
- Page 1 Table of Contents Grapples SGC0548 35825 380-138M Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit.
-
Page 2: Machine Identification
Machine Identification Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new manual. If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were originally ordered, the weights and measurements are no longer accurate for your machine. - Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
-
Page 5: Safety At All Times
Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. - Page 6 Replace parts on this attachment Work in a clean dry area. gas, water, sewer, and others) with genuine Land Pride parts only. Lower attachment to the ground before digging so that they may Do not alter this attachment in a...
- Page 7 Wear protective equipment such When removing and installing as a hard hat, safety shoes, safety wheels, use wheel handling glasses, and ear plugs. equipment adequate for the weight involved. 9/15/16 SGC0548 Grapples 380-138M...
-
Page 8: Important Safety Information
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com. -
Page 9: Using This Manual
Table of Contents Introduction Introduction customer service or repair parts are required. Your Land Land Pride welcomes you to the growing family of new Pride dealer has trained personnel, repair parts, and product owners. equipment needed to service the attachment. -
Page 10: Tractor Requirements
Tractor Requirements Before You Start Make sure that the intended tractor conforms to the The SGC0548 Grapple is designed exclusively for requirements provided on this page. Also, read and attaching to Kubota BX tractors with a front loader. understand this Operator’s Manual for your Claw Kubota Tractor: Grapple. -
Page 11: Section 1: Assembly & Set-Up
380-137A VALVE KIT, BX THIRD FUNCTION Refer to Figure 1-2: Right-Hand Land Pride offers, as an accessory, the “BX Third Side Function Valve Kit”. This kit includes a joystick with two push-buttons (#14) for opening and closing the grapple jaw, valve assembly (#2), bulk head assembly with quick... - Page 12 Figure 1-6 with Hose Route Along Loader Arm 3/8"-16 x 3 1/32" x 2 3/4" u-bolt (#10) and hex whiz Figure 1-7 nuts (#9). Tighten whiz nuts to the correct torque. SGC0548 Grapples 380-138M 9/15/16...
- Page 13 10. Rotate loader quick hitch vertical and position loader 6. Raise grapple slightly off the ground and rotate arms to a suitable traveling height. parking stands (#1) up until locked in place. See “Parking Stand” on page 6 for detailed instructions. 9/15/16 SGC0548 Grapples 380-138M...
- Page 14 11 for detailed hook-up instructions. Figure 1-10 Refer to Figure 1-10: Land Pride’s “BX Direct Pin Accessory Kit” is required when hooking the grapple directly to the front loader without “Kubota’s Original Quick Hitch Option”. See your nearest Land Pride dealer to order the kit.
-
Page 15: Hydraulic Hose Hook-Up
The grapple can tip over grapple into operation. Refer to your tractor’s and cause serious injury or death if stored improperly. Operator’s Manual for recommended hydraulic fluid and procedure for checking hydraulic fluid level. 9/15/16 SGC0548 Grapples 380-138M... -
Page 16: Operating Checklist
Clearances” on page 11 for detailed instructions. components, can fall from equipment, or can obstruct the operator’s view causing serious injury or death. 8. Purge hydraulic system of trapped air by operating all hydraulic functions several times before putting unit into service. SGC0548 Grapples 380-138M 9/15/16... -
Page 17: Section 2: Operating Procedures
• Do not force solid objects in between grapple teeth while closing the upper jaw against the lower jaw. • The parts on your grapple have been specially designed and should only be replaced with genuine Land Pride parts. Altering the grapple can adversely affect its performance and/or reliability. -
Page 18: Transport Safety
Doing so can damage the grapple. 11. Raise or lower load only when stopped, never while traveling. 12. Slow down when traveling over rough or hilly terrain. 13. Do not transport loads on public roadways. SGC0548 Grapples 380-138M 9/15/16... - Page 19 It isn’t going to take you load under control throughout the release. long to learn how to use your new Land Pride Claw Grapple, but we do recommend that you take a little time...
-
Page 20: Section 3: Maintenance & Lubrication
Do not allow children to play on or around the stored grapple. WARNING Do not alter Land Pride equipment or replace parts with other brands. Doing so can cause equipment to perform improperly and may lead to breakage causing bodily injury or death. -
Page 21: Section 4: Specifications & Capacities
Teeth Spacing 9 3/8" Tooth Thickness 1/4" Working Length of Teeth 8 3/8" Hydraulic Cylinder 2" x 4" x 1 1/8" Rod Maximum Pressure Rating 2500 psi 26-1/4 " 17-1/8 " 48-7/8 " 19-3/4 " 35830 9/15/16 SGC0548 Grapples 380-138M... -
Page 22: Section 5: Features & Benefits
Allows the grapple to be hitched directly to the loader arms without Extended Hitch Pins (Accessory) purchasing Kubota’s Original Quick Hitch to make the connection. SGC0548 Grapples 380-138M 9/15/16... -
Page 23: Section 6: Troubleshooting
Prying objects out of the ground. Never use grapple to pry objects. Wedging objects between teeth with upper Do not wedge objects between teeth with claw. upper claw. 9/15/16 SGC0548 Grapples 380-138M... -
Page 24: Section 7: Torque Values Chart
= nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. SGC0548 Grapples 380-138M 9/15/16... -
Page 25: Warranty
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. - Page 26 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...