Weslo Momentum CT 5.8 User Manual page 9

8. Apply a generous amount of grease to the axle on
the Left Upper Body Leg (6). Then, apply grease to a
Large Wave Washer (20), and slide it onto the axle.
Apply a generous amount of grease to the Left
Crank Arm (42). Orient a Crank Arm Spacer (45) so
that the flat side is facing away from the Left Crank
Arm. Then, slide the Crank Arm Spacer onto the Left
Crank Arm.
Then, gradually work the Left Pedal Arm (21) onto
the Left Upper Body Leg (6) while at the same time
working the Left Pedal Arm onto the Left Crank Arm
(42).
Repeat this step for the other side of the elliptical
exerciser.
9. Attach the Left Pedal Arm (21) to the Left Upper
Body Leg (6) with an M8 x 23mm Button Screw
(65), an M8 Washer (64), and a Pedal Leg Cover
(23).
Apply grease to a Large Wave Washer (20), and
slide it onto the Left Crank Arm (42). Then, attach
the Left Pedal Arm (21) to the Left Crank Arm with
an M8 x 25mm Patch Screw (70) and an M8 Large
Washer (81).
See step 4. Tighten the four M8 x 19mm Patch
Screws (73).
Repeat this step for the other side of the elliptical
exerciser.
All manuals and user guides at all-guides.com
9
8
6
Grease
20
21
9
6
23
64
65
21
Grease
42
45
73
Grease
42
20
81
70