Weslo Momentum CT 5.8 User Manual page 8

6. Apply a generous amount of the included grease to
the Pivot Axle (16) and to two Wave Washers (27).
Identify the Left and Right Upper Body Legs (6, 7),
which are marked with "Left" and "Right" stickers.
While another person aligns the Left and Right Upper
Body Legs (6, 7) with the Upright (2) as shown, insert
the Pivot Axle (16) through the Upper Body Legs and
the Upright. Tip: Avoid damaging the Upper Wire
Harness (18) with the Pivot Axle.
Slide a Wave Washer (27) onto each end of the Pivot
Axle (16). Make sure that the Wave Washers
remain on the ends of the Pivot Axle.
7. Tighten an M8 x 23mm Button Screw (65), an M8
Washer (64) and a Pivot Cover (14) into each end
of the Pivot Axle (16).
All manuals and user guides at all-guides.com
8
6
18
2
Hexagonal
Holes
Grease
27
6
7
16
64
65
14
6
27
Grease
16
7
Avoid damaging
the Upper Wire
Harness (18)
65
64
2
14
7