Table of Contents
Advertisement
6 Configuration and Use - Transparent Bridging
The 'Aging' box
Adding entries
Deleting entries
68 / 300
The following figure shows the 'Aging' box:
It indicates the aging timer of the bridge internal database.
If the aging time of a MAC entry has expired this entry will be
removed from the database.
Only in exceptional cases the default value of 300 seconds (5
minutes) needs to be modified. The allowed range is from 10
seconds to 12 days.
Proceed as follows:
1. Browse to the 'Bridge' page.
2. If needed, click
3. Select the phonebook entry from the 'Address' pop down list.
Note: In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 13.2 for more information.
4. Select the encapsulation method for the Bridging port from
the 'Encapsulation' pop down list (per default set to
LLC/SNAP).
5. Optionally, enter a name for the Bridge interface in the
'Interface' field.
6. Click
On the 'Bridge' page, click
want to delete. As a result your selection is highlighted.
Click
and
.
and
to finish the procedure.
next to the Bridging entry you
.
3EC 17766 AAAA TCZZA Ed. 04
Advertisement
Table of Contents
