Alcatel AST570 User Manual page 176

14 Networking Services - IP
Setting an IP address
via the 'Routing' page
176 / 300
Proceed as follows:
1. Click
up the 'Routing' page (See section 21.2 for more
information). On this page the following table can be found:
2. In this table If needed, click
3. Enter the following information:
Select eth0 from the 'Intf' pop down list
D
Enter an IP address in the 'IP Address' field, e.g.
D
192.6.11.150
Enter an associated (sub)netmask in the 'Netmask' field,
D
e.g. 255.255.255.0
Select whether NA(P)T must be applied (pat) or not (none)
D
for this IP address from the 'Translation' pop down list.
4. Click . As a result the new IP settings are applied:
5. To verify connectivity, point your Web browser to the new IP
address. Make sure your PC shares the same subnet.
6. Click
storage.
in the left pane of the AST570 pages to pop
to store the applied IP settings to permanent
.
3EC 17766 AAAA TCZZA Ed. 04