Table of Contents
Advertisement
11 Configuration and Use - Routed PPPoA
Mode: triggering of
PPP session
Idle time limit
124 / 300
The 'Mode' field allows you to configure how a PPP session is
opened.
Three options are available:
Dial in
"
The PPP session is opened manually by clicking
to the PPP connection in the 'Dial in' page.
Always on
"
After the AST570 is powered and finished its Power On Self
Test (POST) successfully, the AST570 automatically tries to
open a PPP session for the PPP entry.
Dial on demand
"
The PPP session is opened automatically for a limited period
of time. The opening of the session is triggered by the arrival
of packets at a/the AST570 Ethernet port, to be sent over the
PPP entry.
Note: By default one PPPoA connection is configured as 'Dial in' (i.e. PPP),
another as 'Always on' (i.e. PPP2).
In case you configured a PPP connection for 'Dial on demand',
the 'Idle Time Limit' box allows you to specify the time after which
an opened, but unused PPP session is closed.
If left free, the idle limit time is infinite (i.e. the PPP session will
never be closed).
next
3EC 17766 AAAA TCZZA Ed. 04
Advertisement
Table of Contents
