Alcatel AST570 User Manual page 184

14 Networking Services - IP
DHCP lease table
Adding leases
manually
184 / 300
This table allows you to overview all current leases of the AST570
DHCP server (if activated) or manually add new leases:
You can add leases manually in case the devices need reserved IP
addresses (e.g. FTP server) or in case the device is not able to
send/receive DHCP requests/replies. These leases are permanent,
i.e. will never be released.
Proceed as follows:
1. Click in the 'DHCP Server Lease' table if needed.
2. Enter the following information:
Enter the MAC address of the device you want to lease an
D
IP address in the 'Client ID' field
Enter an IP address in the 'IP Address' field.
D
3. Click . As a result the new lease is applied.
4. Click
storage.
to store the applied lease to permanent
3EC 17766 AAAA TCZZA Ed. 04