Bosch PRAESENSA Installation Manual page 73

PRAESENSA
Caution!
For compliance to UL 62368‑1 all loudspeaker wiring must be Class 2 (CL2); this requirement
!
does not apply for compliancy to EN/IEC 62368‑1.
Caution!
Amplifier outputs may carry output voltages up to 100 VRMS. Touching uninsulated terminals
!
or wiring may result in an unpleasant sensation.
Notice!
Only amplifier channel 1 and the spare channel are capable of delivering up to 600 W
maximum. All other channels are limited to 300 W maximum. In practice this does not impose
any limitation on the flexibility of partitioning the total amplifier power across the channels,
because if there is one zone with more than 300 W load, which is connected to channel 1, no
other channel can be loaded with more than 300 W anymore without exceeding the total
maximum of 600 W.
Bosch Security Systems B.V.
*Amplifier, 600W 4-channel | PRA-AD604 | en
Installation manual
73
2019.11 | V1.00 |