Information Panel; Making Connections - KAEL Muhendislik Elektronik TC - PT100 Manual

Information Panel

The upper part of the screen of the device has an information panel consisting of icons easily
understood by the user. This panel is always on top of the screen no matter which part the user is
in. The date, time, device operation status, FAULT status, ALARM status, TRIP status, FAN status
information are observed in this panel at the same time. The operating status indicator indicates
OK if the system is normal and returns to exclamation point when an error occurs in the system.
11.10.2016
keys are not pressed for a long time, the device will switch to screen saver mode to extend the life
of the screen and only step down from the top of the screen with the information panel on top.
When any key is pressed, the main screen image appears again.

Making Connections

■ The connection of the device should be done without the system power.
■ The device must be connected as shown in the connection diagram.
■ Do the Pt100 sensor inputs as shown on the back of the unit
■ Do not energize the device without checking all connections using the meter.
SYSTEM
STOP
14:25
FAN ALARM
The fan icon turns on the screen while the fan is running.
If the screen shows a fan but does not turn, then the unit has gone into a saving mode for cooling.
A color LCD display is used in our device to make it much easier and clearer to use. If the
V
TRIP
TRIP
ALARM
TRIP
FAULT
FAN
K-FAN
V
System Normal
FAULT (error existing)
TC - PT100
Temperature Controller
Power supply
Un : 24 ... 240V AC
50/60Hz / DC
Δn : (0,9 – 1,1) x Un
Over-voltage
protection
device
red
red
PT100
white
red
red
PT100
white
red
red
PT100
white
red
red
PT100
white