Epson SC-S60600 Series Operator's Manual page 11

SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series Operator's Guide
K
Note:
If the roll of media has an outer diameter which is
less than 140 mm, the roll core will not reach the
holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
onto the roll holder.
L
To ensure the roll holder is inserted into the roll
core sufficiently, push it twice.
Basic Operations
c
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly during
printing because of slippage between the roll
holder and roll core.
This may cause banding in the print results.
M
Tighten the screw until the screw no longer turns.
c
Important:
❏ If the roll holder screw is loose, the roll
holder may move during printing. This
could cause stripes and unevenness in the
print results.
❏ If the right and left edges of the roll are not
aligned, realign them.
11