VISTA-ICM Installation and Setup Guide
Network Setup and Configuration
Setting up the Network Hardware
Network Setup Requirements
Before you begin connecting VISTA-ICMs to the network, you need at least the
following:
•
PC or other device capable of browsing the setup web pages
CAUTION: Only Internet Explorer, revision 5.0 or 6.0, is supported. Use of other
browsers will give unpredictable results such as incorrect placement of objects or wrong
colors.
•
Router, or wireless router (when using a wireless PDA, wireless tablet or wireless
notebook/laptop)
•
VISTA-ICMs and devices to be controlled by the VISTA-ICMs
•
Ethernet hub or switch (if you have more than four network devices).
The following illustration shows a network setup with a Honeywell Security system, a
Honeywell thermostat, a network router, an IP camera and a computer.
INTERNET
Broadcast Modem (Optional)
(DSL, Wireless, Cable)
Wireless
Router
WAN
IP Camera
HVAC*
6100 ICM
*REQUIRES
ADDITIONAL
HARDWARE
Figure 1 - Basic Network
PDA or
Web Tablet
(Optional)
LAN
PC or Tablet
Computer
(Optional)
SECURITY
VISTA - ICM
VISTA-ICM-002-V0
2