Input Section; Hx-7B And Hx-7W - Toa HX-7B Operating Instructions Manual

6. INPUT SECTION

6.1. HX-7B and HX-7W

• The 2 Speakon connectors are internally connected in parallel to the screw terminals; you can use either one.
• The right table shows the pin arrangement of the Speakon NL4MP connector.
• The usable connector (on the cable end) for the Speakon NL4MP is Speakon NL4FC or NL4FX.
• Wiring diagram of the input connectors is shown at right.
• Two speaker systems can be operated in parallel by connecting
them in a cascade configuration as shown at right.
Note
Be sure to connect the speaker system to the power amplifier's
output terminal of 4 Ω or less.
Connecting it to an output terminal of over 4 Ω may cause
amplifier failure.
6
Pin No.
1 +
1 –
2 +
2 –
Speaker +
Speaker –
2 –
2+
+
–
2 –
Screw terminal
2+
Speakon NL4MP x 2
First speaker
HX-7B, HX-7W
Speaker +
Speaker –
–
–
1 +
1–
1 +
1–
Second speaker