Toa F-1000B Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Toa Manuals
  4. Speaker System
  5. F-1000B
  6. Operating instructions manual

Toa F-1000B Operating Instructions Manual

Toa electronics operating instructions speaker systems f-1000b f-1000bt f-1000btwp f-1000w f-1000wt f-1000wtwp
Hide thumbs Also See for F-1000B:
Table of Contents

Advertisement

Quick Links

Download this manual
SPEAKER SYSTEMS
Thank you for purchasing TOA's Speaker System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
OPERATING INSTRUCTIONS
F-1000B
F-1000BT
F-1000BTWP
F-1000W
F-1000WT
F-1000WTWP
533-06-145-10

Advertisement

Table of Contents
loading

Related Manuals for Toa F-1000B

Summary of Contents for Toa F-1000B

  • Page 1 SPEAKER SYSTEMS Thank you for purchasing TOA's Speaker System. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. OPERATING INSTRUCTIONS F-1000B F-1000BT F-1000BTWP F-1000W F-1000WT F-1000WTWP 533-06-145-10...

  • Page 2: Table Of Contents

    8.4. Ceiling Mounting ... 10 8.5. Speaker Stand Mounting ... 12 8.6. Pole Mounting ... 13 8.7. Partition Board Mounting (F-1000B, F-1000BT, F-1000W, and F-1000WT only) ... 14 9. REPAINTING THE SPEAKER 10. SPECIFICATIONS 10.1. F-1000B and F-1000W ... 16 10.2.

  • Page 3: Safety Precautions

    • (F-1000B, F-1000BT, F-1000W, F-1000WT only) Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts causes the unit to fall off, resulting in personal injury.

  • Page 4: General Description

    • Both the F-1000BTWP and F-1000WTWP feature a waterproof design (IPX4 standard) for protection from any adverse effects of outdoor installations. Applies to the F-1000BTWP and F-1000WTWP. Applies to the F-1000B, F-1000BT, F-1000W, and F-1000WT. 4. DIMENSIONAL DIAGRAM clusters, horizontal ceiling mounting*...

  • Page 5: Impedance Change

    Failure to follow this instruction could result in damage to the speaker or amplifier. 6. ABOUT THE INPUT OVERLOAD PROTECTION CIRCUITRY (F-1000B and F-1000W only) The speaker system features internal input overload protection circuitry for both high and low frequencies.

  • Page 6: Notes On Outdoor Installation

    7. NOTES ON OUTDOOR INSTALLATION • Be sure to mount the speaker in a vertical (portrait-style) orientation. • Adjust the speaker's tilt angle within the shaded range shown below: [Wall and pole: 0º horizontal to 45º downward] • Install the speaker in locations exposed to an ambient temperature range of –10ºC to +50ºC. Exceeding this range could cause speaker failure.

  • Page 7: Installation

    8. INSTALLATION 8.1. Using the Supplied Brackets The speaker system is supplied with the following brackets. Use these brackets properly depending on the installation location and intended application. 8.1.1. When using only the supplied brackets 8.1.2. When using both the supplied and optional mounting brackets 8.2.

  • Page 8: Wall Mounting

    8.3. Wall Mounting When adjusting horizontal and vertical angles: Use the supplied wall bracket, joint bracket, and speaker bracket to permit adjustment of the horizontal and vertical* speaker coverage angles. * Vertical installation. Horizontal: Max. 82º, Vertical: Max. 45º downward Horizontal installation.
  • Page 9 Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speaker angle, then tighten the screws. Note: Match the orientation of the arrows on both the wall bracket and joint bracket. Step 3. Attach the speaker bracket to the speaker's rear using the supplied screws. Note: Attach the speaker bracket according to the speaker mounting orientation.

  • Page 10: Ceiling Mounting

    8.4. Ceiling Mounting Vertical orientation Use the supplied joint bracket and speaker bracket. Note Speaker coverage angles can only be adjusted in the vertical direction (Max. 45º downward). Adjust the speaker's tilt angle within the shaded range shown below: * Changing the orientation of the front panel logo The front panel logo is affixed to the mesh net using double-faced tape.
  • Page 11 The mating surfaces of the speaker bracket and joint bracket are designed to interlock. Ensure that both parts are securely engaged with each other after mounting is complete. Horizontal orientation (F-1000B, F-1000BT, F-1000W, and F-1000WT only) Use the supplied joint bracket and speaker bracket in combination with the optional HY-CM10B or HY-CM10W Ceiling Mount Bracket.

  • Page 12: Speaker Stand Mounting

    8.5. Speaker Stand Mounting The speaker can be mounted on the optional ST-16A Speaker Stand using the supplied joint bracket and speaker bracket. Step 1. Attach the joint bracket to the speaker stand bracket using the speaker stand's supplied bolt and nut. Step 2.

  • Page 13: Pole Mounting

    8.6. Pole Mounting (F-1000BTWP and F-1000WTWP only) To mount the speaker on a pole with diameter of 10 – 34 cm, use the supplied wall bracket, joint bracket, and speaker bracket in combination with the optional YS-60B Pole Band. Speaker coverage angles can be adjusted in the horizontal and vertical direction*.

  • Page 14: Partition Board Mounting (F-1000B, F-1000Bt, F-1000W, And F-1000Wt Only)

    Use the supplied joint bracket and speaker bracket in combination with the optional HY- BH10B Board Hanger Bracket. Refer to the instruction manual enclosed with the optional mounting bracket for its mounting details. (F-1000B, F-1000BT, F-1000W, and F-1000WT only) [Installation example]...

  • Page 15: Repainting The Speaker

    9. REPAINTING THE SPEAKER Follow the procedure below when repainting the speaker grill and cabinet. Note Take care not to touch the speaker diaphragm during work. Step 1. Peel off the logo carefully, then remove the screw underneath to detach the mesh speaker grill. [Detaching the mesh grill] Note Because the logo is affixed using double-faced tape, peel it off carefully.

  • Page 16: Specifications 10.1. F-1000B And F-1000W

    10. SPECIFICATIONS 10.1. F-1000B and F-1000W Model No. Enclosure Type Power Handling Capacity Rated Impedance Output Sound Pressure Level Frequency Response Crossover Frequency Directivity Angle Speakers Input Terminals Enclosure Mesh Speaker Grill Speaker Bracket Joint Bracket, Wall Bracket Dimensions Weight...

  • Page 17: F-1000Bt And F-1000Wt

    10.2. F-1000BT and F-1000WT Model No. Enclosure Type Power Handling Capacity Rated Impedance Output Sound Pressure Level Frequency Response Crossover Frequency Directivity Angle Speakers Input Terminals Enclosure Mesh Speaker Grill Surface-treated steel plate, black, paint Speaker Bracket Aluminum die-cast, black, paint Joint Bracket, Wall Bracket Dimensions Weight...

  • Page 18: F-1000Btwp And F-1000Wtwp

    10.3. F-1000BTWP and F-1000WTWP Model No. Enclosure Type Power Handling Capacity Rated Impedance Output Sound Pressure Level Frequency Response Crossover Frequency Directivity Angle Speakers Input Terminals Water Resistance Operating Temperature Enclosure Mesh Speaker Grill Surface-treated steel plate, black, anti-rust paint Speaker Bracket Aluminum die-cast, black, paint Joint Bracket, Wall Bracket...

This manual is also suitable for:

F-1000btF-1000btwpF-1000wF-1000wtF-1000wtwp

Table of Contents