Toa F-1000BTWP EB-Q Instruction Manual
Hide thumbs
Also See for F-1000BTWP EB-Q:
- Specifications (2 pages) ,
- Operating instructions manual (18 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Quick Links
SPEAKER SYSTEMS
TABLE OF CONTENTS
..............................................................3
Thank you for purchasing TOA's Speaker System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
........................................ 2
...................................... 3
........................................ 3
......... 4
...................................... 4
....................... 5
.......... 5
EN 54-24: 2008
12
1438/CPD/0282
1438
INSTRUCTION MANUAL
F-1000BTWP EB-Q
F-1000WTWP EB-Q
F-1300BTWP EB-Q
F-1300WTWP EB-Q
F-2000BTWP EB-Q
F-2000WTWP EB-Q
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
................................................ 5
............................................ 8
...... 10
.............................. 11
.................................. 12
................... 13
................................................ 14
Advertisement
Table of Contents
Related Manuals for Toa F-1000BTWP EB-Q
Summary of Contents for Toa F-1000BTWP EB-Q
-
Page 1: Table Of Contents
....... 5 6.2.2. When using both the supplied and optional mounting brackets ..5 Thank you for purchasing TOA's Speaker System. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. EN 54-24: 2008 1438/CPD/0282... -
Page 2: Safety Precautions
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety. -
Page 3: General Description
2. GENERAL DESCRIPTION Speakers are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The speaker is certified to the European Standard EN 54 24:2008. 3. -
Page 4: Wiring And Using Terminal Cover
5. WIRING AND USING TERMINAL COVER [ Imput terminal polarity ] Input terminal Input terminal Terminal cover (accessory) Tapping screw 4 x 12 (accessory) (‒) BLACK Bushing* Speaker cable [Stripped conductor] ø 6 ‒ ø 10 mm 10 mm 30 mm * Screwed onto the Terminal cover at the factory. -
Page 5: Using The Supplied Brackets
6.2. Using the Supplied Brackets The speaker system is supplied with the following brackets. Use these brackets properly depending on the installation location and intended application. [Speaker bracket] [Joint bracket] [Wall bracket] 30º 6.2.1. When using only the supplied brackets Installation c i l Joint bracket... - Page 6 [Wall bracket mounting dimensions] [Installation example] 4-ø6 mm Vertical speaker mounting 30 mm (F-1000 or F1300 series) 45 mm (F-2000 series) Hexagon bolt M6 x 12 (with plain washer and spring washer) Wall bracket Joint bracket Fixing bolt M5 x 60 (F-1000 or F-1300 series) or M6 x 85 (F-2000 series) [Vertical speaker installation] Use the supplied machine screw M5 x 20 (with plain washer and spring washer) Speaker bracket...
- Page 7 Step 1. Mount the wall bracket to the wall surface. Match the orientation of the arrow label with the horizontal direction (left or right) the speaker faces. Note: Hardware used for mounting the wall bracket to the wall is not supplied. •...
-
Page 8: Ceiling Mounting
6.4. Ceiling Mounting Vertical orientation Use the supplied joint bracket and speaker bracket. Note Speaker coverage angles can only be adjusted in the vertical direction (Max. 45º downward). Adjust the speaker's tilt angle within the shaded range shown below: [Installation example] 0°... - Page 9 Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket and loosely securing the fixing bolt for temporary speaker installation. Step 4. Use the supplied terminal cover when connecting the speaker cable to the input terminal. Note: Refer to p.
-
Page 10: Reducing The Speaker
7. REDUCING THE SPEAKER COVERAGE ANGLE (F-2000 series only) The speaker's coverage angle can be reduced to 80º horizontal x 80º vertical from its normal range of 110º x 100º by attaching the supplied horn adapter to the speaker's horn section. º... -
Page 11: Repainting The Speaker
8. REPAINTING THE SPEAKER Follow the procedure below when repainting the speaker grill and cabinet. Note: Take care not to touch the speaker diaphragm during work. Step 1. Peel off the logo carefully, then remove the screw underneath to detach the mesh speaker grill. [Detaching the mesh grill] Mesh speaker grill Countersunk head... -
Page 12: Dimensional Diagram
9. DIMENSIONAL DIAGRAM [Top] [Bottom] Unit: mm 2-M5 mounting screw holes Note Hole seals are adhered over the holes at the factory. Before attaching the speaker mounting bracket to this side, remove them using a pointed tool. [Side] 235 (F-2000 series) 161 (F-1300 series) [Front] 131 (F-1000 series) -
Page 13: Specifications
10. SPECIFICATIONS 10.1. F-1000 series Frequency response [ dB ] [ Hz ] Frequency Response (1W, 4m) 10.2. F-1300 series Frequency response [ dB ] [ Hz ] Frequency Response (1W, 4m) 10.3. F-2000 series Frequency response [ dB ] [ Hz ] Frequency Response (1W, 4m) -
Page 14: Specification
10.4. Specifications for F-1000, F-1300 and F-2000 series Model No. F-1000BTWP EB-Q F-1300BTWP EB-Q F-2000BTWP EB-Q F-1000WTWP EB-Q F-1300WTWP EB-Q F-2000WTWP EB-Q Standard Certified to the European Standard EN 54-24:2008 Loudspeaker for voice alarm systems for fire detection and fire alarm systems. - Page 15 Model No. F-1000BTWP EB-Q F-1300BTWP EB-Q F-2000BTWP EB-Q F-1000WTWP EB-Q F-1300WTWP EB-Q F-2000WTWP EB-Q Finish Enclosure: HIPS, black or white Mesh speaker grill: Surface-treated steel plate, black or white, paint Speaker bracket: Aluminum die-cast, black or white, paint Joint bracket, Wall bracket, screws and bolts: Stainless steel...
- Page 20 URL: http://www.toa.jp/ 533-06-257-70...