Snooze Operation; Stereo Headphone Jack - Timex T612S Product Manual

Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Press the Alarm 1 (or Alarm 2) Button once. The unit will show the current alarm time on the bottom part of the
display .
Press again to disarm the alarm. The alarm is set to go on when the alarm icon is displayed.
Resetting the Alarm to come on the Next Day
• After the alarm sounds, press the Power On/Off/Alarm Reset Button to turn off the alarm. The alarm will be
automatically reset and back for the same time the following day.
Note: If more than one alarm is set, when you press the Power On/Off/Alarm Button to stop the alarm that is
sounding, this will not affect the other alarm from turning on at the time it is set for.
• If you do not want the alarm to turn on the following day, press the corresponding alarm button once until the
alarm indicator is turned off.
• If the alarm is not turned off after it sounds, it will play for approximately one hour, then turn off automatically.
This cycle will repeat every 24 hours unless the controls are changed.
1. Press and hold the Snooze button during normal operation to set the Snooze period. Press the >> Button or
<< Button to set the snooze period from 1 to 30 minutes (press and hold to adjust rapidly).
2. Press the Snooze Button after the alarm sounds. The alarm will turn off then come back on after the selected
snooze period. You may repeat this several times during one-hour alarm cycle.
Connect a headphone (not included) to the jack on the right side of the unit for private listening. The built-in speakers
are shut off when headphones are connected.
Important! You must disconnect the headphone from the headphone jack before you go to sleep or you will not
hear the built-in speakers when the alarm sounds.
Alarm Operation

Snooze Operation

Stereo Headphone Jack

10