Disassembling Of Lcd Unit - Canon ZR70 MC A Service Manual

1-20 Disassembling of LCD Unit - 1

(1) Remove three screws (b × 3) and detach the LCD Top Cover.
Note : When detaching the LCD Top Cover, be careful of the claw parts A and B inside the cover.
(2) Disconnect the CN901 and CN902 and detach the Hinge Ass'y.
<Note on Reassembling>
(1) When attaching the Hinge Ass'y, take care not to pinch the white cable of Backlight Ass'y.
(2) Before attaching the LCD Top Cover, be sure to insert the claw part A.
(3) Insert the CN901 and CN902 to their deepest positions securely, and check if there is no gap due to insufficient seating.
(1) - b
(1) - b
LCD Top Cover
Claw A
Inside the LCD top cover
Hinge Ass'y
(1) - b
Claw B
b
3mm
Metal
M1.7
Fig. 4-19
4-20
ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
CN901
(2)
(2)
(2)
CN902
(1)
Note on Reassembling (1)
Hinge Ass'y
Take care not to pinch the cable.
CN901
Check that
there is no
gap due to
unseating.
CN902