Separation Of Rear Cover Unit - Canon ZR70 MC A Service Manual

1-23 Separation of Rear Cover Unit

(1) Remove four screws (h × 4) and detach the Battery Terminal Ass'y and GND Plate.
(2) Remove one screw (h × 1) and detach the DC P.C.B.
(3) Detach the Battery Eject Lever and Sring.
<Note on Reassembling>
(1) Secure the cables of Battery Terminal Ass'y with the hooks as illustrated below.
(2) When attaching the Battery Terminal Ass'y, screw the Red, Black, White and Gray cables in this order.
<Instruction for Supplies>
Rear Cover, Spring : Apply HANAL FL-778. (DY9-3026-000)
Note on Reassembling (1)
Black
Secure the cables with the hooks.
Red
Secure the cables with the hooks.
GND Plate
(1) - h
(1) - h
h
4mm
Metal
M1.7
(self tap)
White
Gray
Red
Black
White
Gray
(1)
Battery Terminal
Ass'y
(2) - h
Fig. 4-22
4-23
ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
Rear Cover
Spring
(3)
Instruction for Supplies
(2)
Hanal FL-778
DC P.C.B.
Battery Eject Lever
Hanal FL-778