Getting Ready To Start Recording; Adjusting The Position And Brightness Of The Lcd Screen - Canon HG10 Instruction Manual

2
Press. or
T
to select the
~
icon and press
@
to open the
setup menus.
3
Press. or
T
to select [DATE/
TIME SETUP] and press
@.
4
Press. or
T
to select [T.ZONE/
DST] and press
@.
The default setting is New York.
To
SET THE HOME TIME ZONE
5
Make sure that the
*
time zone is
selected.
6
Press .... or
~
to select the area
that corresponds to your local
time zone and press
@.
To adjust for daylight saving time,
select the area name marked with a
.:,;
.
7
Press
I
FUNC·I
to close the menu.
WHEN YOU TRAVEL
Select the time zone to match the local
time at your destination.
5 Press
T
to move the orange
selection frame to the
1'.
time
zone.
6 Press .... or ~ to select the area
that corresponds to the local time
at your destination and press
@ .
• Refer to the changing date and
time displayed on the screen.
• To adjust for daylight saving time,
select the area name marked with
a
-*.
7 Press
I
FUNC·I
to close the menu.
I 'I
Getting Ready to Start
Recording
Adjusting the Position and Brightness
of the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees
toward the lens (allowing the subject
to monitor the LCD screen while you
use the viewfinder). Rotating the
panel 180 degrees is also useful if you
wish to include yourself when
recording with the self timer. This is
the only case where you can use the
viewfinder and the LCD screen
simultaneously.
Subject can monitor the LCD screen
29
2
Press. or
T
to select the
~
icon and press
@
to open the
setup menus.
3
Press. or
T
to select [DATE/
TIME SETUP] and press
@.
4
Press. or
T
to select [T.ZONE/
DST] and press
@.
The default setting is New York.
To
SET THE HOME TIME ZONE
5
Make sure that the
*
time zone is
selected.
6
Press .... or
~
to select the area
that corresponds to your local
time zone and press
@.
To adjust for daylight saving time,
select the area name marked with a
.:,;
.
7
Press
I
FUNC·I
to close the menu.
WHEN YOU TRAVEL
Select the time zone to match the local
time at your destination.
5 Press
T
to move the orange
selection frame to the
1'.
time
zone.
6 Press .... or ~ to select the area
that corresponds to the local time
at your destination and press
@ .
• Refer to the changing date and
time displayed on the screen.
• To adjust for daylight saving time,
select the area name marked with
a
-*.
7 Press
I
FUNC·I
to close the menu.
I 'I
Getting Ready to Start
Recording
Adjusting the Position and Brightness
of the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees
toward the lens (allowing the subject
to monitor the LCD screen while you
use the viewfinder). Rotating the
panel 180 degrees is also useful if you
wish to include yourself when
recording with the self timer. This is
the only case where you can use the
viewfinder and the LCD screen
simultaneously.
Subject can monitor the LCD screen
29