Wb Adjustment (3) - Canon ZR70 MC A Service Manual

2-4-5 WB Adjustment (3)

CHART Light box (5600°K)
SPEC. Automatic adjustment
Procedure)
(1) Referring to the table shown below, carry out WB adjustment (3).
ST EP PROCEDURE
WB (3)
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
2-4-6 Virtual EEPROM and Flash Memory Writing
SPEC. Automatic writing
Procedure)
(1) According to the table shown below, write adjustment data (2-4-1 to 2-4-5) into the virtual EEPROM and flash memory.
ST EP PROCEDURE
EEPROM & FLASH WRIT ING
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
2 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
MONIT OR
CS Function MD ADDR DT
2 08 ST 3005 00
WR
↑ ↑ ↑ ↑
RD * ↑ Adjustment is completed.
↑ ↑ ↑
MONIT OR
CS Function MD ADDR DT
2 08 ST 3006 00
RD *02 Completion of virtual EEPROM writing.
↑ ↑ ↑
0 08 ST 0081 00
RD
↑ ↑ ↑ ↑
4-40
ZR70 MC A, ZR65 MC A, ZR60 A
CHAPTER 4. DISASSEMBLING ADJUSTMENT
Microcomputer operation
Adjustment is in progress.
Completion with DT :00 (In addition, NG)
Microcomputer operation
Completion with DT :02, NG with DT :03
Preparation for flash memory updating.
Execution of flash memory updating.