Troubleshooting - Pyle PLMRDK18B User Manual

TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the
problems persist after checklist has been made, consult your nearest
service dealer.
Symptom
No power
No sound
The operation
keys do not work
The radio does
not Work. The
radio station
automatic selection
does not work.
Cause
The car ignition switch
is not on.
The fuse is blown.
Volume is in minimum Adjust volume to a desired level
Wiring is not properly
connected
The built-in micro
computer is not
operating properly
due to noise
The antenna cable is
not connected
The signals are too
weak
Solution
If the power supply is connected
to the car accessory circuits, but
the engine is not moving, switch
the ignition key to "ACC".
Replace the fuse.
Check wiring connection
Press the reset button
Insert the antenna cable firmly
Select a station manually