Troubleshooting - Pyle PLRMR23BTW User Manual

TROUBLESHOOTING

If you suspect something is wrong, immediately switch power off. Do not use the unit in abnormal
condition, for example without sound, or with smoke or foul smell, can cause fire or electric shock.
Immediately stop using it and call the store where you purchased it. Never try to repair the unit by yourself
because it is dangerous to do so.
General
1) Ship's/Car's engine switch is not on.
- Turn your Ship's/car's key to ACC or ON.
2) Cable is not correctly connected.
- Check the connection.
3) Fuse is burnt.
- Replace fuse.
4) Volume is in mute or minimum.
- Check volume or mute on/off, adjust volume to a desired level.
5) Sound skips.
- The installation angle is more than 30°. Adjust the installation angle less than 30°.
6) The operation keys do not work.
- The built-in micro-computer is not operating properly due to noise. Press the RESET button to restore
the program to zero.
.
Radio
1) Much noise in broadcasts.
- Station or signal is too weak. Select other stations of stronger signal level.
2) The antenna cable is not connected.
- Insert the antenna cable firmly into the antenna socket of this receiver.
3) Preset station is reset.
- Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live.
USB/SD
USB or SD card is connecting but no sound
- USB or SD card connection is not good. Take it out and insert again.
- USB or SD card is damaged or no music file inside. Change to another USB or SD card, or record music
inside it.
- 13 -