Download Print this page

Thule Bed Rider 822/91822 Assembling Instructions page 6

Thule bed rider car rack parts list

Advertisement

®
BIKE INSTALLATION/INSTALLATION DU VÈLO
SWEDEN
CAR RACK SYSTEMS
1
2
538 cables lock access hole
Trou d'accès pour cables anti-vol 538
3
To release forks
Libération de la fourche
Test security by tugging at forks. If forks can move out of the skewer,
open lever and tighten the nut slightly. Close lever again with firm pressure.
Repeat if necessary.
Térifer la solidité du montage en tirant sur la fourche. Si la fourche se dégage de l'axe, ouvrir le levier et serrer l'écrou un
peu plus. Rabattre le levier en appliquant une pression assez forte. Recommencer au besoin.
• Open lever and
loosen nut.
Soulever le levier et désserrer
l'écrou.
• Set the bicycle forks onto
the skewer.
• Engager la fourche du vélo sur l'axe.
• With lever open, tighten nut until the
lever closes with some resistance.
• Avec le levier en position ouverte, serrer l'écrou jusqu'à ce
que le levier se ferme avec une certaine résistance.
• Loosen or tighten the as needed so
that lever closes with some resistance.
• Serrer ou desserrer l'écrou au besoin de manière que le levier
se ferme avec une certaine résistance.
• For added security purchase 538 cable
lock.
• Pour une sécurité accrue, utlisez un cable anti-vol 538.
• Lift forks straight out.
• Soulevez la fourche verticalement.

Advertisement

loading