Thermostat Controller - Frymaster CF Series Operating Instructions Manual

.

THERMOSTAT CONTROLLER

The Thermostat Controller utilizes a frypot
thermostat that is directly connected to a tem-
perature knob mounted on the control panel.
Rotating the knob to the desired cooking tem-
perature (setpoint) directly adjusts the thermo-
stat control to that temperature. Placing the
ON/OFF switch in the ON
plies power to the fryer's components and
causes the switch to illuminate. Placing the
Melt Cycle switch
causes the fryer burner to repeatedly cycle on
for a few seconds and off for a longer period.
The purpose is to gradually melt solid short-
ening to prevent scorching, and to prevent
CF SERIES GAS FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
Frymaster
Temperature
THERMOSTAT CONTROLLER
position sup-
in the ON position
Heat
ON/OFF Mode
Switch Light
2
ON
OF F
C
F
1 4
Melt Cycle
Knob Switch
creation of "hot spots" on the frypot. The
switch is illuminated when in the ON position.
The fryer remains in the Melt Cycle
mode until the Melt Cycle switch is
placed in the OFF position.
The Heat Mode Indicator
the frypot is below setpoint.
The Thermostat Controller requires no pro-
gramming, but it may require calibration from
time to time. To determine if it requires cali-
bration, refer to Check Thermostat Controller
Thermostat Calibration on page 5-4.
3-8
3
CAUTION
illuminates when