Table of Contents
Advertisement
DECATHLON (D & HD) SERIES GAS FRYERS
CHAPTER 5: CONTROLLER OPERATING INSTRUCTIONS
5.1 Operating Instructions: Electronic Thermostat Controller
Decathlon Series gas fryers come standard with an electronic thermostat controller, which
incorporates a temperature-control circuit board, a potentiometer, and a temperature probe. The
potentiometer knob is turned to the desired temperature setting, similar to a standard thermostat.
Various switch options for the controller are available, based on fryer options at the time of order.
Typical switch options are illustrated below.
Boil-Out Switch (Optional):
When "ON", this switch by-
passes the melt-cycle and
allows the water temperature
to reach 196°F.
Electronic thermostat controller with power switch and boil-
out option.
Fryer Power Switch: Turns fryer on
and off.
O
F
F
O
F
F
Manual Filter Power Switch (if
equipped with filter system):
Connects/disconnects power to
filter pump if primary system fails.
Fryer power switch should be
"OFF" when filter is in use.
Drain Reset Switch
(Optional): Resets drain
safety switch after closing
drain valve. Drain valve
POWER
must be completely closed
O
prior to resetting switch.
N
FRYER
R
E
S
E
T
BOIL OUT
O
N
7 Amp (115VAC) or 5 Amp
(230VAC) Filter Reset Breaker
(if equipped with filter system):
Inline between the filter pump
and the filter power switch.
Ensure power is "OFF" before
resetting or replacing.
5–1
Advertisement
Table of Contents
