Preface - Siemens CM 1542-5 Manual

Preface

Purpose of the documentation
This device manual supplements the system manual of the automation system S7-1500 and
the function manuals. All functions that go beyond the system are described in the system
manual.
With the information in this manual and the system manual, you will be able to commission
the CM 1542-5 communications module.
See also Guide to the documentation (Page 7)
Conventions
Make sure you read the special notices below:
Note
A notice contains important information on the product described in the documentation,
handling the product or about parts of the documentation you should pay particular attention
to.
Names
● In this document, the term "CM" is also used instead of the full product name.
● The name STEP 7 is used to mean the STEP 7 Professional configuration tool.
License conditions
Note
Open source software
Read the license conditions for open source software carefully before using the product.
You will find license conditions in the following documents on the supplied data medium:
● DOC_OSS-S7CMCP_74.pdf
● DOC_OSS-CM1542-5_76.pdf
CM 1542-5
Manual, 11/2014, C79000-G8976-C290-02
3