Table of Contents
Advertisement
Operating Instructions SIPLUS CMS4000 ION BINARYINPUT T001
1
Preface
1.1
Purpose of this Document
This operating instructions support you to operate the Binary Input Node SIPLUS
CMS4000 ION BINARYINPUT, named ION BI as peripheral device in the System
SIPLUS CMS4000.
1.2
Required Basic Knowledge
Basic knowledge of automation technology and equipment condition monitoring is nec-
essary.
These operating instructions contain a description of the components, which are valid at
the time of publishing the manual. We reserve the right, to enclose product information
with current information to new components and updated components.
1.3
Validity of this Document
This document is valid for the Interface Node ION BI.
1.4
Modification compared with the Previous Version
-
-
Notice
You will find the version of the operating instructions in the number of the footer: A5E02185979A-02.
1.5
CE Marking
The Interface Node ION BI meets the requirements and objectives of the EG-Guideline
according to 2004/108/EG.
1.6
Standards
You will find detailed information in chapter 6.1 of these operation instructions.
Notice
The specified concessions are only valid according to an authorized label on the product.
1.7
Classification of Information
Additional to these operation instructions, you need the operation instructions of
SIPLUS CMS4000 X-Tools.
SIPLUS CMS4000 ION BI
Operating Instructions, 03/2010, A5E02185979A-02
Max. sampling frequency is 50 kHz
Input current 10,2 mA at 24V DC
4
Advertisement
Table of Contents
