Advertisement
T6634-TA10 TE20 TF20-9JS0 Series Fan Coil Thermostat (ON/OFF) - Installation Instructions
T6634-TA10 TE20 TF20-9JS0
:
T6000
PCB
:
:
601V-B01A-NB Rev 2-Issue Date 09 2012
(
) -
T6000
PCB
T6000
IMPORTANT
Use this T6000 Series Line Voltage Fan Coil Thermostat only as an operating
control. Where failure of malfunction of the T6000 Series Thermostat could
lead to personal injury or property damage to the controlled equipment or other
property, additional precautions must be designed into the system. Incorporate
and maintain other devices such as supervisory or alarm systems or safety or
limit controls intended to warn of, or protect against, failure or malfunction of the
T6000 Series Thermostat.
Do not install this thermostat in condensing, wet, or damp environments. Moisture
may cause damage to the thermostat.
Do not remove PCB from the enclosure cover. Removing the PCB from the
enclosure cover voids the product warranty.
Make all wiring connections in accordance with local, nation, and regional
regulations. Do not exceed the T6000 Series thermostat's electrical ratings.
WARNING:
Disconnect power supply before making electrical connections. Contact with
components carrying hazardous voltages can cause electrical shock and may result
in severe personal injury or death.
Risk of Electrical Shock
Ground the thermostat according to local, national, and regional regulations.
Failure to ground the thermostat may result in electrical shock and severe personal
injury and death.
Risk of Electrical Shock and Property Damage
Insulate and secure each unused wire lead before applying power to the
thermostat. Failure to insulate and secure each unused wire lead may result
property damage, electrical shock, and severe personal injury or death.
CAUTION:
Do not apply power to the system before checking all wiring connections. Short
circuited or improperly connected wires may result in permanent damage to the
equipment.
4
Advertisement
