Listening to messages
After you answer the new message alert, you can
listen to the messages as follows.
When the remote access code is set to
"Inactivate":
Press [4] to play the new message during the
announcement.
When the remote access code is set to
"Activate":
1 Enter the remote access code (page 150) during
the announcement.
2 Press [4] to play the new message.
Note:
Within 10 seconds after listening to new messages,
•
you can press [#] [9] during the call to turn off the
new message alert by a call feature.
Even if the unit makes a new message alert call, the
•
handset redial list does not show the record.
149 |
P a g e