Texas Instruments TravelMate 3000 User Manual page 147

When using a mouse,
the built-in LCD screen
goes blank after a few
minutes.
LCD screen backlight
does not light, even
when brightness con-
trol fully turned up.
Troubleshooting
Computer in automatic power-
saving mode-Press Shift
key to turn on display. if
Power indicator is orange,
press Fn-F4 (Stndby) keys to
resume operation.
None of the above-Screen
power unit may be faulty.
Contact your Texas
Instruments reseller.
Setup Program Backlight Off
set to N minutes- Set Back-
light Off item to Always On
to prevent LCD from blank-
ing because of keyboard
inactivity.
Display unit turned off be-
cause of keyboard inactivity
(see "The Setup Program- in
Chapter 4 of this manual)-
Press the Shift key to turn
backlight on again.
In Standby mode--if Power
indicator is orange, unit is in
Standby mode; press the
Fn-F4 keys to turn off
Standby mode.
None of the above-Screen power
unit may be faulty.
Contact your Texas
Instruments reseller.
Troubleshooting E-3