Service and diagnostics
7.3 Setting of the operating mode during run-up
7.3
Setting of the operating mode during run-up
7.3.1
Service switch (PCU 50.5)
The service switch on the PCU 50.5 is a rotary switch with 16 possible positions.
The "PCU Hardware Service" component as part of the PCU-Basesoftware provides a function
to read-out the switch positions.
The switch position on the hardware can be used to specify the operating mode for the run-up
of the PCU 50.5.
You can find the meanings of the switch positions under Possible operating modes
(Page 159).
Figure 7-2
Further information
You can find details on the hardware of the PCU 50.5 in the
Operator Components and Networking.
158
Service switch
Manual SINUMERIK 840D sl
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
PCU Base Software (IM10)