Supplied Software - Siemens SINUMERIK 840DE sl Commissioning Manual

Delivery condition
1.1 PCU Base Software Windows 7
The following SIMATIC panels can be operated on IPCs with PCU-Basesoftware:
● SIMATIC IFP 2200 MT: 6AV7863-4MA00-0AAx
● SIMATIC IFP 2200 MT EXT: 6AV7863-4MB10-0AAx
● SIMATIC IFP 2200 MT: 6AV7466-8MA00-0MT0
● SIMATIC IFP 2200 MT EXT: 6AV7466-8MA10-0AX0
● SIMATIC IFP 1900 MT: 6AV7863-3MA00-0AAx
● SIMATIC IFP 1900 MT EXT: 6AV7863-6MA10-1AA0
● SIMATIC IFP 1900 MT EXT Neutral: 6AV7863-6MA10-1NA0
● SIMATIC IFP 1900 MT OEM: 6AV7456-7MA00-0GS0
● SIMATIC IFP 1500 MT EXT: 6AV7863-5MA10-1AA0
● SIMATIC IFP 1500 MT EXT Neutral: 6AV7863-5MA10-1NA0
For these SIMATIC IPC configurations, you can order the SINUMERIK PCU-Basesoftware/
IPC separately under the following article number:
● 6FC5800-0AP86-0YB0
Other or unnamed SIMATIC IPC configurations, screens or PC systems are not compatible
with the PCU-Basesoftware.
You can find an example workflow for commissioning and configuration under Overview
(Page 25).
You can find all of the information on the hardware in the operating instructions for the
corresponding SIMATIC IPC:
Note
Do not switch off SIEMENS PC systems with Windows 7 on the hardware!
Loss of data may result on Windows-based systems if the system is not shut down properly
before it is disconnected from the power source. For technical reasons, data is still being written
to the SSD shortly after shutdown.
To avoid loss of data, use a SITOP UPS module.
See Configuring the SITOP UPS module for use with the PCU Base Software (Page 52).
1.1.2

Supplied software

Overview
The SINUMERIK PCU-Basesoftware contains the following software and tools:
Software
Microsoft Windows 7
Microsoft Windows PE
Symantec Ghost
8
Function
Service Desktop
Service Center
Creating and restoring disk images
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
PCU Base Software (IM10)