Siemens SINUMERIK Commissioning Manual page 435

2.7.14 Load Array (LA)
Description
The LA (Load Array) function can be used to load an array from another file.
Programming
Syntax:
Description:
Parameters:
Note
If an array in the current configuration file must be replaced by an array from another
configuration file, then both arrays must have the same name.
Example
DEF VAR2 = (S/*ARR5/"Out"/,"Toggle
field")
PRESS(HS5)
LA("ARR5","arrayext.com")
VAR2 = ARR5[0]
END_PRESS
//A(ARR5)
("Out"/"In")
//END
//A(ARR5)
("Above"/"Below"/"Right"/"Left"
)
//END
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
(Identifier [, File])
LA
Loads array from file
Identifier Name of array to be loaded
File File in which the array is defined
; Extract from file
; Load array ARR5 from file arrayext.com
; "Above"/"Below"/"Right"/"Left" appears in the
VAR2 toggle field
instead of "Out/In"
; Extract from file arrayext.com
Programming
2.7 Functions
maske.com
2-85