Additional Information For Seg 3,4,5,6,8,9 - Samsung MCM-D201N Installation Manual

Additional information for SEG 3,4,5,6,8,9

When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows.
Temp.
Ts
Set temp. for Auto
mode
Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9.
Standard temp. for Heating
→ Cooling
b
Standard temp. for
Cooling
d
Standard temp.
for Cooling →
Heating
c
B
A D
a
Standard temp. for Heating
A : Set with SEG4(˚C)
B : Set with SEG5(˚C)
C : Set with SEG6(˚C)
D : Set with SEG8(˚C)
C
27