Setting Seg16, Seg17 Option; Setting Seg18, Seg20 Option; Setting Heat Mode; Setting Seg23, Seg24 Mode - Samsung MCM-D201N Installation Manual

12. Setting Cool mode
Press button to be change to Cool mode in the OFF status.

13. Setting SEG16, SEG17 option

Press Low Fan button( ) to enter SEG16 value.
Press High Fan button( ) to enter SEG17 value.
Each time you press the button,
14. Setting Dry mode
Press button to be change to Dry mode in the OFF status.

15. Setting SEG18, SEG20 option

Press Low Fan button( ) to enter SEG18 value.
Press High Fan button( ) to enter SEG20 value.
Each time you press the button,
16. Setting Fan mode
Press button to be change to Fan mode in the OFF status.
17. Setting SEG21, SEG22 option
Press Low Fan button( ) to enter SEG21 value.
Press High Fan button( ) to enter SEG22 value.
Each time you press the button,

18. Setting Heat mode

Press button to be change to HEAT mode in the OFF status.

19. Setting SEG23, SEG24 mode

Press Low Fan button( ) to enter SEG23 value.
Press High Fan button( ) to enter SEG24 value.
Each time you press the button,
Step 3. Checking the option you have set
After setting option, press
→
→
Step 4. Entering an option
Press the operation button
For the correct option setting, you must enter the option twice.
Step 5. Checking operation
1) Press the power reset button or the reset button of an outdoor unit to reset the settings.
2) Take the batteries out of the remote controller and insert them again and then press the
Option setting
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
... will be selected in rotation.
button to check whether the option code you have entered is correct or not.
→ →
→ →
with the direction of a remote controller to set.
Status
SEG16
SEG18
SEG21
SEG23
→ →
→
button.
SEG17
SEG20
SEG22
SEG24
21