System Reference Code A6005082; System Reference Code A9002000 - IBM i Series Handbook

If Word 13 value is:
| |
Word 16
|
|
|
|
|
|
|
|
|
|
|
|
If Word 17 value is:
1
2
3
4
FA
Note: It is expected that a D-mode IPL with a new load source direct access storage device (DASD) will
show the console type value of 00. Examples of when this can occur might be that the copy of data
from a failing DASD did not copy all data or you are installing a new logical partition. Also, there
are times when the DASD is late reporting an the console type value was not retrieved in time. In
these cases you can use the console service function to set a console type value or attempt to
contact the console again.

System reference code A6005082

Here are some possible reasons you received system reference code (SRC) A6005082.
v If the system displays this SRC, it typically means that a console was found but lost the console
connection.
v If the console is reassigned and the system can locate a console, the SRC is no longer shown.
v The console type does not affect this SRC.
v Only issued in attended mode IPLs.

System reference code A9002000

Here are some possible reasons you received system reference code (SRC) A9002000.
v If the system displays this SRC, it typically means that a console was not found by i5/OS.
v The system value QAUTOCFG must be set to ON. i5/OS is unable to create the new console device if
it is off.
v If you just migrated the console from one type to another and the new console fails to work in i5/OS
you may need to use another workstation to manually delete the controller and device description
associated with the old console device.
Failure
Failure
Async card not detected
No cables detected
Wrong cable detected
Port in use
Not configured for direct
cable
LAN
Word 14 means:
Word 16 in the form of xxxx yy zz means the following:
v xxxx where:
– The twinaxial-related SRC is represented by the first
4 characters.
v yy where:
– 0A = No console IOP tag
v zz where:
– 00 = Not defined by user (old default value)
– 01 = Twinaxial
– 02 = Operations Console (Direct)
– 03 = Operations Console (LAN )
– 04 = Hardware Management Console (HMC) or
Thin Console
Cable
Word 18 means:
Card position
Card position
Card position
Word 15 means:
Word 19 means:
Card type
Cable ID
Card type
Operations Console
97