Installing The 5.25-Inch Device In The Peripheral Bay - eMachines A26EV17F Manual

Hide thumbs Also See for A26EV17F:
Table of Contents

Advertisement

Installing the 5.25-inch Device in the Peripheral
Bay
Your system has two 5.25-inch horizontal peripheral bays. If only one device (e.g., CD-ROM/DVD-
ROM drive) is installed in the system's 5.25-inch peripheral bay, you can add an optional device
such as a CD/DVD-ROM drive, hard disk drive, LS-120 drive, or ZIP drive in the empty peripheral
bay.
To install an optional device in the bay, follow these steps:
1. Remove the cover according to the instructions in "Removing the Cover" in this chapter.
2. Remove the HDD bracket from the system chassis. For more information, see "Installing an
Additional Hard Disk Drive" in this chapter.
NOTE
If you want to install a 3.5-inch hard disk drive, you must purchase the 5.25-inch dock or
mounting bracket and attach it to your 3.5-inch hard disk drive to install your hard disk drive for
the 5.25-inch bay.
3. Detach all cables from the optical drive.
All manuals and user guides at all-guides.com
Installing and Removing Drives
4-9

Advertisement

Table of Contents
loading

Table of Contents