Table of Contents
Advertisement
When Using Duplex REAC Lines
If the REAC MAIN signal is interrupted, communication automatically switches to REAC BACKUP.
S-2416 settings
[REAC MODE] switch
[MODE] switch
1
REAC SLAVE MODE
2
REAC BACKUP MODE
When Using a Split Connection
S-2416 settings
[REAC MODE] switch
NOTE
• Change the setting of the [REAC MODE] switch while the S-2416
is powered down.
• When a split connection is used, incoming audio signals at
INPUT on the S-2416 are not sent to the V-Mixer. They are output
only from OUTPUT (including AES/EBU OUTPUT).
S-2416: Slave
Setting
S (Slave)
Setting
OFF
CLOCK SLAVE
OFF
BACKUP
S-2416: Split
S-4000D
Setting
SP (Split)
V-Mixer: Master
NOTE
Change the setting of the [REAC MODE] switch and [MODE]
switch while the S-2416 is powered down.
S-2416: Slave
V-Mixer: Master
MEMO
• Inserting a splitter between the REAC master and slave devices
makes it possible to distribute the output from the REAC master
device to multiple REAC split devices.
Devices whose REAC mode is set to Split become receive-only
devices for signals from the REAC master device.
Connecting REAC Devices
15
Advertisement
Table of Contents
