Table of Contents
Advertisement
DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
EN61000-4-2
Electrostatic Discharge
EN61000-4-3
Radiated RF Immunity
EN61000-4-4
Electrical Fast Transient
EN61000-4-5
Surge on I/O Lines
EN61000-4-6
Conducted RF on I/O lines
CISPR11/
RF Emissions
EN 55011
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of July 1, 2001.
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-2002-157
Rev A
89/336/EEC – The EMC Directive
73/23/EEC – The Low Voltage Directive
Manufacturer's Name:
Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
2101 Field Wizard Module
Year of Issue:
2001
EN 61326-1998 EMC Requirements for Electrical Equipment for
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement,
Description
Measurement, Control, and Laboratory Use
Control and Laboratory use.
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m
Level 1 – 1kV on I/O lines
1kV common mode,
0.5KV differential mode
150 kHz to 80 MHz,
3V rms, 80% modulated
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance Criteria
B
B
B
B
B
B
Advertisement
Table of Contents
