Table of Contents
Advertisement
3.6.1 Retrieve Data Display
Figure 3-6 Retrieve Data Display
Figure 3-7 Data Retrieval Status Display
When you press F1 RETRIEVE from the Main Display, the
window shown in Figure 3-6 will be displayed.
The Retrieve Data display has four function key options, as
described below.
F1 AUTO – Press the F1 key to retrieve data from the starting
point in time scheduled by the Master Data Base. This time is
generated each time the Field Wizard transfers data to Flowlink.
A message in the Field Wizard window will tell you the time and
date that data collection will start if you select this option.
During data collection, the name of the module being interro-
gated will be displayed, along with a gauge so you can note the
progress (see Figure 3-7).
If there is more than one module active at the site, then the data
will be retrieved one module at a time. One module will be com-
pletely interrogated before data will be retrieved from any other
module.
Information inside the status window will change as the interro-
gation process proceeds. As the data is being retrieved, both the
gauge and number of readings will change.
If you want to cancel the data collection process, press F6. This
will return you to the Main Display, and will save the data that
has already been collected.
2101 Field Wizard
Section 3 Operation
3-9
Advertisement
Table of Contents
