Table of Contents
Advertisement
Figure 3-15 Sensor Diagnostics Display
3.6.4 Data Display
Figure 3-16 Data Display
Sensor Diagnostics – When you press F5 DIAG from the Site
Setup display, the diagnostic screen shown in Figure 3-15 will be
displayed.
After a momentary delay, during which the Field Wizard
requests the report from the 2100 Series module, a screen con-
taining diagnostic results for the selected module's sensors will
appear. Use the four directional arrow keys to scroll through the
information.
Once you have viewed the information, press F6 EXIT to exit to
the Site Setup display.
When you press F4 DATA from the Main Display, the Data
screen shown in Figure 3-16 will appear.
This display shows information about the data stored inside the
currently selected module: the time and date of the most recent
reading, total number of readings, and the quality of the readings
(percentage that are good). Use the Up and Down arrow keys to
scroll through the information.
When multiple 2100 Series modules are present, you can press
F2 NEXT to display the information for a different module.
2101 Field Wizard
Section 3 Operation
3-15
Advertisement
Table of Contents
