Table of Contents
Advertisement
2101 Field Wizard
Section 3 Operation
3.6.5 Site Information
Display
Figure 3-17 Site Information Display
3.7 Standalone Mode
Figure 3-18 Standalone Mode Main Display
3-16
Press F1 RETRIEV to retrieve the data for the displayed module.
You will be advanced to the Retrieve Data Display, described in
Section 3.6.1.
Press F6 EXIT to return to the Main Display.
When you press F5 INFO from the Main Display, the Site Infor-
mation screen is displayed (Figure 3-17).
This screen shows information about module models and names,
as well as hardware and software revision numbers. Use the Up
and Down arrow keys to scroll between the different modules.
To identify a module, highlight it using the arrow keys and then
press F5 IDENTIFY. This will cause the LED for that module to
light up continuously for a short period of time. If you press F5
IDENTIFY when Field Wizard is highlighted, the system beeps.
Press F6 EXIT to return to the Main Display.
When the Field Wizard is not connected to a site or a PC, it is in
standalone mode. The Main Display in standalone mode is shown
in Figure 3-18.
In this mode, you can examine the data log stored inside the
Field Wizard unit, but will not be able to view or process the
actual data.
Advertisement
Table of Contents
