Table of Contents
Advertisement
3.7.1 Standalone
Information Display
Figure 3-19 Standalone Information Display
3.8 PC Data
Synchronization Mode
Figure 3-20 PC Data Synchronization Mode Display
To view the data retrieval log, press F2 LOG. The display will be
similar to that shown in Figure 3-9 and described in Section
3.5.2.
Pressing F5 INFO while in the standalone mode will display the
Standalone Information screen (Figure 3-19).
This screen is similar to that described in Section 3.5.4, except
that it only lists information pertaining to the Field Wizard itself.
Because it is not connected to a site, there isn't any module infor-
mation.
To exit from the Standalone Information Display, press F6 EXIT.
When the Field Wizard is connected to a PC, the user interface
(keypad) is locked out to prevent any errors while transmitting
data to the PC.
In this mode, the Field Wizard's display looks like that shown in
Figure 3-20.
The Field Wizard's keypad will not function in this mode, but will
return to normal function when the Field Wizard is disconnected
from the PC.
2101 Field Wizard
Section 3 Operation
3-17
Advertisement
Table of Contents
