Connecting The Ac Adapter To The Field Wizard; Connecting The Communication Cable To The Field Wizard - Teledyne Field Wizard 2101 Installation And Operation Manual

Figure 2-1 Connecting the AC Adapter to the Field Wizard
Figure 2-2 Connecting the Communication Cable to the Field Wizard
Uncap the communication connector on the right side of the Field
Wizard and attach the Communications Cable, as shown in
Figure 2-2. Connect the other end of the Communications Cable
to a serial COM port on the PC.
As a default Flowlink setting, the Quick Connect dialog box
opens when you start Flowlink. (If it is not open, click the Quick
Connect icon or select File, Quick Connect.)
2101 Field Wizard
Section 2 Preparation and Installation
2-3